Galaxy Attachments

Trident

The Trident louvre is manufactured from a satin anodised miro material and conforms to category 2. It is therefore ideal for use in areas where VDT's are being used.

ORDERING REF	NOMINAL LENGTH (MM)	NOMINAL WIDTH (MM)
TAL118A/GL	600	300
TAL136A/GL	1200	300
TAL158A/GL	1500	300
TAL170A/GL	1800	300
TAL218A/GL	600	300
TAL236A/GL	1200	300
TAL258A/GL	1500	300
TAL270A/GL	1800	300
TAL318/GL	600	600
TAL336/GL	1200	600
TAL358/GL	1500	600
TAL370/GL	1800	600
TAL418/GL	600	600
TAL436/GL	1200	600
TAL458/GL	1500	600
TAL470/GL	1800	600

Print this page

Print Catalogue page PDF

Challenger

Challenger is our low brightness aluminium louvre to suit the Galaxy range. It has ribbed cross members with aluminium reflectors giving a space to height ratio greater than 1:1.75shr. This allows fewer luminaires to be used in a given area.

The louvre is attached to the luminaire by means of wishbone springs.

ORDERING REF	NOMINAL LENGTH (MM)	NOMINAL WIDTH (MM)
CAL118A/GL	600	300
CAL136A/GL	1200	300
CAL158A/GL	1500	300
CAL170A/GL	1800	300
CAL218A/GL	600	300
CAL236A/GL	1200	300
CAL258A/GL	1500	300
CAL270A/GL	1800	300
CAL318/GL	600	600
CAL336/GL	1200	600
CAL358/GL	1500	600
CAL370/GL	1800	600
CAL418/GL	600	600
CAL436/GL	1200	600
CAL458/GL	1500	600
CAL470/GL	1800	600

AFP

An aluminium trim complete with prismatic diffuser that fits integrally into the Galaxy. The diffuser fits to the luminaire using wishbone springs. Available with opal diffuser.

This diffuser satisfies the requirements of Tp(b) material, Tp(a) quality is available on request, (AFT).

Fitted with minimum 2.5mm Ultra Violet Stabilised material.

ORDERING REF	NOMINAL LENGTH (MM)	NOMINAL WIDTH (MM)
AFP18A/GL	600	300
AFP36A/GL	1200	300
AFP58A/GL	1600	300
AFP70A/GL	1800	300
AFP18B/GL	600	600
AFP36B/GL	1200	600
AFP58B/GL	1600	600
AFP70B/GL	1800	600