Fitzgerald logolink to home page

Fitzgerald banner graphic

about us link

link to news

link to contact page

link to contents index

link to gallery

link to FAQ

SECTION 5.53

You are at: ABOUT US > EMERGENCY > MUNICIPAL RANGE Emergency Converted

Municipal Range

Emergency Converted

 

Supplied complete
with lamp

 

< PREVIOUS | NEXT >

Municipal

Nightlight Options

LED Nightlight

LED Nightlight

7W PL Nightlight

7W PL Nightlight

3 year guarantee symbol
Autotest symbol

ICEL logo

COMPLIES TO ICEL 1004
IP 40 symbol
Energy Efficiency symbol
HF logo
 

Print this page
 

The Municipal Range is designed to meet the stringent requirements of hospital and local authority applications whilst retaining a stylish modern appearance.

Application

Ideal for circulation areas in hospitals, colleges and other similar institutions.

Specification

Wipe clean Smooth Diffuser (internally reeded).

Removable gear tray.

Screw fixed polycarbonate endcaps ensure protection from unauthorised tampering.

High frequency control gear.

Fused terminal block.

Battery packs are designed to provide a 3hr emergency backup, with a battery life of 4 years.

Please note these luminaires are suitable for open areas only, not defined escape routes.

Mains version shown on page 7.3.

Variations

Single and twin lamp configurations.

Range of control gear options.

Nightlight options include 7 watt PL lamp - suffix /NL, and white LED cluster - suffix/NLL (additional Body length + 85mm).

Corner Mounting Kit for asymmetric distribution.

Occupancy Sensor option available.

Occupancy Sensor - (/OS)

MICRO-WAVE SENSOR AND PHOTO-CELL.

Switches on automatically when occupancy is detected and the ambient light-level is below a threshold level and off again when no further occupancy is detected.

Manual over-ride is available with a hand-held remote control (E016452) or a conventional switch.

Manual over-ride does not isolate the fitting, so operation via the sensor will be resumed when the area has been vacated.

The micro-wave sensor has a number of unique advantages over traditional passive infra-red sensors.

• It is mounted behind the diffuser and therefore does not compromise luminaire appearance, IP rating or vandal resistance.

• A larger detection zone than a PIR sensor. Ideally suited for use in larger areas such as corridors.

• Wide detection area allows wiring for two-way master/slave operation. e.g. a corridor could have a fitting complete with a sensor at each end and all the intervening fittings are wired so that if either sensor should detect movement the entire corridor will be lit.

Measurements

Municipal Range diagram


Municipal Range corner mounting kit diagram

Ordering

ORDERING REF
LAMP DETAIL
OVERALL LENGTH A (MM)
FIXING CENTRES (B)
LAYOUT
T8

HSP136/HF/M3

1 X 36W

1220

300

B

HSP158/HF/M3

1 X 58W

1520

300

B

HSP170/HF/M3

1 X 70W

1820

600

B

HSP218/HF/M3

2 X 18W

620

CL

A

HSP236/HF/M3

2 X 36W

1220

300

B

HSP258/HF/M3

2 X 58W

1520

300

B

HSP270/HF/M3

2 X 70W

1820

600

B

HIGH EFFICENCY (HE) T5

HSP121/HF/M3

1 X 21 W

620

300

B

HSP128/HF/M3

1 X 28 W

1220

300

B

HSP135/HF/M3

1 X 35 W

1520

300

B

HSP214/HF/M3

2 X 14 W

620

CL

A

HSP228/HF/M3

2 X 28 W

1220

300

B

HSP235/HF/M3

2 X 35 W

1520

300

B

HSPCMK

CORNER MOUNTING KIT

 

Electronic Digital Dimming

suffix /DTD

Electronic Digital SwitchDim

suffix /SD

Occupancy Sensor

suffix /OS

NIGHTLIGHT 7W PL

suffix /NL

LED cluster

suffix /NLL

With Nightlight option

additional Body length +85mm

Testing, Slaves

-- DESIGNATION
AUTOMATIC TESTING
Available with AutoTest Autotest symbol

Insert /AT into reference

i.e. HSP136/HF/ATM3

Available with Lite Test

Insert /ATC into reference

i.e. HSP136/HF/ATCM3

SLAVE LUMINAIRES

Available as 240V AC/DC Slave

Add suffix /CB240

Available as Low Voltage AC/DC Slave

Add suffix /LV110*

* 110, 50 or 24 as required

Back to top