Fitzgerald logolink to home page

Fitzgerald banner graphic

about us link

link to news

link to contact page

link to contents index

link to gallery

link to FAQ
SECTION 5.22

You are at: ABOUT US > EMERGENCY > MR 5 POLE CONVERSION MODULES

MR 5 Pole Conversion Modules

< PREVIOUS | NEXT >

3 year guarantee symbol
IP 20 symbol
 

Print this page

Suitable for use with Electronic Ballasts

Lamp Options

See selection table

Materials

Module case - steel, white finish.

Battery end caps - polycarbonate.

Batteries - sealed NiMH battery

Installation Notes

Suitable for fitting integral to host luminaire, where thermal and electro-magnetic test results permit.

Remote mounting of complete kit or batteries only available.

Contact technical support for full details.

Supplied complete with battery end caps for mounting, battery leads, M4 fixing screws/nuts and LED with 1000mm lead.

Options

3 hour duration.

Mode of operation dependant on host luminaire.

Dimensions

DESCRIPTION

L (MM)

W (MM)

D (MM)

FIXING CENTRES (MM)

MR MODULES

155

44

29.5

145

3 CELL BATTERY & CAPS

160

33

33

150

4 CELL BATTERY & CAPS

220

33

33

210

5 CELL BATTERY & CAPS

SINGLE STICK

280

33

33

280

2+3 CELL STICKS

100+160

33

33

100+160

Technical Spefication

SUPPLY VOLTAGE

230V ± 10%, 50 - 60HZ

SUPPLY CURRENT

50 MA MAXIMUM

BATTERY CHARGE CURRENT

0.24 A NOMINAL

BATTERY DISCHARGE CURRENT

1.1 A NOMINAL

TA (AMBIENT)

50°C

TC (CASE)

75°C

BATTERY CELL

1.2V 4AH NI-CAD

EMERGENCY LUMEN OUTOUT/BLF

SEE SELECTION TABLE

NORMAL LUMEN OUTPUT

FULL RATED OUTPUT OF LAMP (MAINTAINED CIRCUITS)

RECHARGE PERIOD

24 HOUR (14 HOUR FOR 1 HOUR DURATION)

Back to top

Selection table

This table indicates the most suitable choice of module and the corresponding resulting ballast lumen factor with batteries indicated.

LAMP TYPE

CONVERSION KIT (INCL BATTERIES)

BATTERY CONFIGURATION

BALLAST LUMEN FACTOR (BLF)

COMPACT FLUORESCENT

10W 2D

MRAC302

3 CELL (1X3) 3.6V

0.20

16W 2D

MRAC301

3 CELL (1X3) 3.6V

0.24

21W 2D

MRAC301

3 CELL (1X3) 3.6V

0.18

28W 2D

MRAC401

4 CELL (2X2) 4.8V

0.16

38W 2D

MRAC401

5 CELL (2+3) 6.0V

0.09

5W TC

MRAC302

3 CELL (1X3) 3.6V

0.19

7W TC

MRAC302

3 CELL (1X3) 3.6V

0.17

9W TC

MRAC302

3 CELL (1X3) 3.6V

0.21

11W TC

MRAC301

3 CELL (1X3) 3.6V

0.16

10W TC-D

MRAC301

3 CELL (1X3) 3.6V

0.27

13W TC-D

MRAC301

3 CELL (1X3) 3.6V

0.18

18W TC-D

MRAC301

3 CELL (1X3) 3.6V

0.14

26W TC-D

MRAC301

3 CELL (1X3) 3.6V

0.15

18W TC-L

MRAC302

3 CELL (1X3) 3.6V

0.12

24W TC-L

MRAC301

3 CELL (1X3) 3.6V

0.08

36W TC-L

MRAC401

4 CELL (2X2)4.8V

0.11

LINEAR FLUORESCENT

8W T5

MT8318P

3 CELL (1X3) 3.6V

0.18

13W T5

MRAC301

3 CELL (1X3) 3.6V

0.20

18W T8

MRT8318

3 CELL (1X3) 3.6V

0.17

30W T8

MRT8336

3 CELL (1X3) 3.6V

0.09

36W T8

MRT8458

4 CELL (1 X4) 4.8V

0.11

58W T8

MRT8570

5 CELL (1X5) 6.0V

0.09

70W T8

MRT8570

5 CELL (1X5) 6.0V

0.09

20W T12

MRT8318

3 CELL (1X3) 3.6V

0.24

40W T12

MRT8336

3 CELL (1X3) 3.6V

0.14

CIRCULAR FLUORESCENT

22W T9

MRAC302

3 CELL (1X3) 3.6 V

0.1

32W T9

MRAC401

4 CELL (1X4) 4.8V

0.09

Notes

Lamps with low mecury dosage require an AC drive current and should be used with modules ADV443 (up to 36W) and ADV553 (up to 58W). Please consult with the lamp manufacturer.

Amalgam lamps may not be suitable for emergency use. Please consult with the lamp manufacturer.

Back to top