Mintaka

Supplied excludinglamp

< PREVIOUS | NEXT >

Print this page

Print Catalogue page PDF

A Zone 2 ATEX certified IP65 luminaire for hazardous areas, the Mintaka is available in 18, 36 and 58 watt models and can be supplied with either single or twin lamps (18w twin only).

Specification

GRP body with robust polycarbonate diffuser.

Easy access for tube replacement via a speedy stainless steel clip mechanism.

High frequency ballast as standard.

ATEX Certified. Mounting facilities.

Stainless steel snap action fixing.

Drill through bolt fixing or gull wing bracket.

Cable entries 2 x M20 - 1 plugged.

Certification Data

MN136/HF	T4 @ -40°C to + 55°C EExn
MN158/HF	T4 @ -40°C to + 55°C EExn
MN218/HF	T4 @ -40°C to + 55°C EExn
MN236/HF	T4 @ -40°C to + 55°C EExn
MN258/HF	T4 @ -40°C to + 55°C EExn

Certification and Approval

Certification Code:	EEx n II 2 GD T4 -40°C to +50°C
Certification Standard:	EN50021
Certification Number:	Epsilon EX01 ATEX 1167
Degree of Protection:	IP65 to IEC 529

Variations

All sizes available as emergency option, add suffix /M3 to ordering reference.

Through wiring available on request.

Measurements

Mintaka diagram

Ordering

ORDERING REF	LAMP DETAIL	LENGTH 'L' (MM)	WIDTH 'W' (MM)	FIXING CENTRE LAYOUT LENGTH (MM)
MN136/HF	36W	1315	102	800
MN158/HF	58W	1615	102	1100
MN218/HF	2 x 18W	705	172	400
MN236/HF	2 x 36W	1315	172	800
MN258/HF	2 x 58W	1615	172	1100

Add suffix /M3 for 3hr maintained operation.